Opel Team Serbia
https://opelteamserbia.com/forum/

Znacenje oznaka na serijskom broju motora kod Opela
https://opelteamserbia.com/forum/viewtopic.php?f=167&t=413		 Stranica 1 od 1
Autoru:  OmegaV6 [ 18 Dec 2006 14:42 ]
Tema posta:  Znacenje oznaka na serijskom broju motora kod Opela
Opel engine identification conventions (idea) by archiewood
Preuzeto sa: http://www.everything2.com/index.pl?node_id=1362646


All engines manufactured by Vauxhall/Opel - as with those of all vehicle manufacturers - have identification codes, which reveal information about a particular engine. For clarity, an example of a Vauxhall/Opel engine identification code is 'C20LET'. See that engine's node for explanation of the engine and how the designation relates to its specification.

The standard form of such an identification number (for petrol engines, as opposed to diesel engines) is as follows:

ABBCCDE

Where:

A = Exhaust emission standard ahered to by the engine in question (in this case, they are European Community directives pertaining to emission limits). One of the following:
'C' = EC 91/441/EEC
'X' = EC 91/441/EEC (stage 2)
Where there is no letter, the engine adheres to EC directive ECE R 83 A.

B = Engine capacity in cubic centimetres (cc). This is a two digit number - e.g. '20' means 2.0 litres, '35' means 3.5 litres.

C = Compression Ratio. One of the following:
'G' = less than or equal to 8.5:1
'L' = 8.5:1 to 9.0:1
'N' = 9.0:1 to 9.5:1
'S' = 9.5:1 to 10.0:1
'X' = 10.0:1 to 11.5:1
'Y' = more than or equal to 11.5:1

D = Mixture system. One of the following:
'E' = Multi-point fuel injection
'Z' = Central injection
'V' = Carburettor

E = Specific vehicle version. This is often not used, and little information exists on the meaning of all the variants of this segment of the code. Some of them are:
'H' = High output/supercharging
'V' = Volume model
'R' = Increased output
'T' = Turbo

As an example, one of Vauxhall/Opel's recent engines, the X25XE (going through the identification in part order):

X - adheres to EC emission directive EC 91/441/EEC (stage 2)
25 - has a 2.5 litre capacity
X - has a compression ratio of 10.0:1 to 11.5:1
E - has multi-point fuel injection.

In addition to this, if one were to search out the engine number of the particular engine (as found stamped on the engine block, usually in front of the clutch housing), one would likely find an extended version of the code as described above, with further details in the form:

ABBCCDEFFGGGGG

ABBCCDE are as described above.
FF = Country of manufacture. One of the following:
'01' = RĂĽesselsheim
'02' = Bochum
'08' = Ellesmere Port
'14' = Kaiserslautern
'19' = Aspern
'20' = Hungary
'25' = Holden
'31' = Brazil
'0S' = Szentgotthard

GGGGG is the engine serial number.
Autoru:  OmegaV6 [ 18 Dec 2006 14:45 ]
Tema posta: 
Znam, nije tema za tuning sekciju ali ne vidim gde bih je dodao - nije ni za offtopic :)
Autoru:  LemaX [ 18 Dec 2006 14:48 ]
Tema posta: 
Korisno! :thumbleft:
Autoru:  Danecuprija [ 04 Nov 2008 14:53 ]
Tema posta:  Re: Znacenje oznaka na serijskom broju motora kod Opela
Sve to u pdf formatu
http://www.topbuzz1.carenthusiasts.co.u ... _codes.pdf
I html
http://www.clubopel.com/link.php?url=ht ... _codes.htm
Stranica 1 od 1 Sva vremena su u UTC + 1 sat [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/